#

# Based upon the NCSA server configuration files originally by Rob McCool.

#

# This is the main Apache server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://www.apache.org/docs/> for detailed information about

# the directives.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# After this file is processed, the server will look for and process

# C:/usr/Apache/conf/srm.conf and then C:/usr/Apache/conf/access.conf

# unless you have overridden these with ResourceConfig and/or

# AccessConfig directives here.

#

# The configuration directives are grouped into three basic sections:

#  1. Directives that control the operation of the Apache server process as a

#     whole (the 'global environment').

#  2. Directives that define the parameters of the 'main' or 'default' server,

#     which responds to requests that aren't handled by a virtual host.

#     These directives also provide default values for the settings

#     of all virtual hosts.

#  3. Settings for virtual hosts, which allow Web requests to be sent to

#     different IP addresses or hostnames and have them handled by the

#     same Apache server process.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/usr/local/apache" will be interpreted by the

# server as "/usr/local/apache/logs/foo.log".

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:apache").

# If a drive letter is omitted, the drive on which Apache.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths, however, to avoid

# confusion.

#



### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#



#

# ServerType is either inetd, or standalone.  Inetd mode is only supported on

# Unix platforms.

#

ServerType standalone



#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

ServerRoot "c:/usr/apache/"



#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile logs/httpd.pid



#

# ScoreBoardFile: File used to store internal server process information.

# Not all architectures require this.  But if yours does (you'll know because

# this file will be  created when you run Apache) then you *must* ensure that

# no two invocations of Apache share the same scoreboard file.

#

ScoreBoardFile logs/apache_runtime_status



#

# In the standard configuration, the server will process httpd.conf (this

# file, specified by the -f command line option), srm.conf, and access.conf

# in that order.  The latter two files are now distributed empty, as it is

# recommended that all directives be kept in a single file for simplicity.

# The commented-out values below are the built-in defaults.  You can have the

# server ignore these files altogether by using "/dev/null" (for Unix) or

# "nul" (for Win32) for the arguments to the directives.

#

ResourceConfig conf/srm.conf

AccessConfig conf/access.conf



#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300



#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On



#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100



#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 15



#

# Apache on Win32 always creates one child process to handle requests.  If it

# dies, another child process is created automatically.  Within the child

# process multiple threads handle incoming requests.  The next two

# directives control the behaviour of the threads and processes.

#



#

# MaxRequestsPerChild: the number of requests each child process is

# allowed to process before the child dies.  The child will exit so

# as to avoid problems after prolonged use when Apache (and maybe the

# libraries it uses) leak memory or other resources.  On most systems, this

# isn't really needed, but a few (such as Solaris) do have notable leaks

# in the libraries.  For Win32, set this value to zero (unlimited)

# unless advised otherwise.

#

# NOTE: This value does not include keepalive requests after the initial

#       request per connection. For example, if a child process handles

#       an initial request and 10 subsequent "keptalive" requests, it

#       would only count as 1 request towards this limit.

#

MaxRequestsPerChild 0



#

# Number of concurrent threads (i.e., requests) the server will allow.

# Set this value according to the responsiveness of the server (more

# requests active at once means they're all handled more slowly) and

# the amount of system resources you'll allow the server to consume.

#

ThreadsPerChild 50



#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, in addition to the default. See also the <VirtualHost>

# directive.

#

#Listen 3000

#Listen 12.34.56.78:80



#

# BindAddress: You can support virtual hosts with this option. This directive

# is used to tell the server which IP address to listen to. It can either

# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the <VirtualHost> and Listen directives.

#

#BindAddress *



#

# Apache Modules compiled into the standard Windows build

#

# The following modules are bound into the standard Apache binary distribution

# for Windows.  To change the standard behavior, uncomment the following lines

# and modify the list of those specific modules to be enabled in the server.

#

# WARNING: This is an advanced option that may render your server inoperable!

# Do not use these directives without expert guidance.

#

#ClearModuleList

#AddModule mod_so.c mod_mime.c mod_access.c mod_auth.c mod_negotiation.c

#AddModule mod_include.c mod_autoindex.c mod_dir.c mod_cgi.c mod_userdir.c

#AddModule mod_alias.c mod_env.c mod_log_config.c mod_asis.c mod_imap.c

#AddModule mod_actions.c mod_setenvif.c mod_isapi.c



ClearModuleList

#AddModule mod_vhost_alias.c

AddModule mod_env.c

AddModule mod_log_config.c

#AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

#AddModule mod_status.c

#AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_isapi.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

#AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_alias.c

#AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

#AddModule mod_auth_anon.c

#AddModule mod_auth_dbm.c

#AddModule mod_auth_digest.c

#AddModule mod_digest.c

#AddModule mod_proxy.c

#AddModule mod_cern_meta.c

#AddModule mod_expires.c

#AddModule mod_headers.c

#AddModule mod_usertrack.c

#AddModule mod_unique_id.c

AddModule mod_so.c

AddModule mod_setenvif.c

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Please read the file README.DSO in the Apache 1.3 distribution for more

# details about the DSO mechanism and run `apache -l' for the list of already

# built-in (statically linked and thus always available) modules in your Apache

# binary.

#

# Note: The order in which modules are loaded is important.  Don't change

# the order below without expert advice.

#

LoadModule anon_auth_module modules/mod_auth_anon.so

LoadModule dbm_auth_module modules/mod_auth_dbm.so

LoadModule digest_auth_module modules/mod_auth_digest.so

LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule digest_module modules/mod_digest.so

LoadModule expires_module modules/mod_expires.so

LoadModule headers_module modules/mod_headers.so

LoadModule proxy_module modules/mod_proxy.so

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule speling_module modules/mod_speling.so

LoadModule info_module modules/mod_info.so

LoadModule status_module modules/mod_status.so

LoadModule usertrack_module modules/mod_usertrack.so

LoadModule vhost_alias_module modules/mod_vhost_alias.so

LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule mime_magic_module modules/mod_mime_magic.so





#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information (ExtendedStatus

# Off) when the "server-status" handler is called. The default is Off.

#

ExtendedStatus On



### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#



#

# Port: The port to which the standalone server listens.  Certain firewall

# products must be configured before Apache can listen to a specific port.

# Other running httpd servers will also interfere with this port.  Disable

# all firewall, security, and other services if you encounter problems.

# To help diagnose problems use the Windows NT command NETSTAT -a

#

Port 80



#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.

#

ServerAdmin admin@krasnal.tk



#

# ServerName allows you to set a host name which is sent back to clients for

# your server if it's different than the one the program would get (i.e., use

# "www" instead of the host's real name).

#

# Note: You cannot just invent host names and hope they work. The name you

# define here must be a valid DNS name for your host. If you don't understand

# this, ask your network administrator.

# If your host doesn't have a registered DNS name, enter its IP address here.

# You will have to access it by its address (e.g., http://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.

#

# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your

# machine always knows itself by this address. If you use Apache strictly for

# local testing and development, you may use 127.0.0.1 as the server name.

#

ServerName 127.0.0.1





#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

#DocumentRoot "c:/usr/Apache/httpd/html/"



#

# Each directory to which Apache has access, can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# permissions.

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

</Directory>



#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#



#

# This should be changed to whatever you set DocumentRoot to.

#



<Directory "c:/usr/Apache/httpd/html/">

    AllowOverride FileInfo AuthConfig Limit

    Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI FollowSymLinks

    <Limit GET POST OPTIONS PROPFIND>

        Order allow,deny

        Allow from all

    </Limit>

    <LimitExcept GET POST OPTIONS PROPFIND>

        Order deny,allow

        Deny from all

    </LimitExcept>

</Directory>



#

# UserDir: The name of the directory which is appended onto a user's home

# directory if a ~user request is received.

#

# Under Win32, we do not currently try to determine the home directory of

# a Windows login, so a format such as that below needs to be used.  See

# the UserDir documentation for details.

#



<IfModule mod_userdir.c>

    UserDir "c:/usr/krasnal/www/*"

</IfModule>



#

# Control access to UserDir directories.  The following is an example

# for a site where these directories are restricted to read-only.

#

<Directory "c:/usr/krasnal/www/*">

    AllowOverride FileInfo AuthConfig Limit

    Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI FollowSymLinks

    <Limit GET POST OPTIONS PROPFIND>

        Order allow,deny

        Allow from all

    </Limit>

    <LimitExcept GET POST OPTIONS PROPFIND>

        Order deny,allow

        Deny from all

    </LimitExcept>

</Directory>



#-------------- WAP ---------------------

<Directory "c:/usr/Apache/httpd/html/wap">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>



<Directory "c:/usr/krasnal/www/*/wap">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>



DirectoryIndex index.wml

#-------------- WAP ---------------------



LoadModule php4_module c:/usr/php/sapi/php4apache.dll

ScriptAlias /php/ "c:/usr/php/"

Action application/x-httpd-php "c:/php/php.exe"

AddType application/x-httpd-php .php .php3 .phtml





#

# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index.  Separate multiple entries with spaces.

#

<IfModule mod_dir.c>

    DirectoryIndex index.html index.phtml index.php3 index.php index.shtml index.cgi

</IfModule>









#

# AccessFileName: The name of the file to look for in each directory

# for access control information.

#

AccessFileName .htaccess



#

# The following lines prevent .htaccess files from being viewed by

# Web clients.  Since .htaccess files often contain authorization

# information, access is disallowed for security reasons.  Comment

# these lines out if you want Web visitors to see the contents of

# .htaccess files.  If you change the AccessFileName directive above,

# be sure to make the corresponding changes here.

#

# Also, folks tend to use names such as .htpasswd for password

# files, so this will protect those as well.

#

<Files ~ "^.ht">

    Order allow,deny

    Deny from all

</Files>





#

# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each

# document that was negotiated on the basis of content. This asks proxy

# servers not to cache the document. Uncommenting the following line disables

# this behavior, and proxies will be allowed to cache the documents.

#

#CacheNegotiatedDocs



#

# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever

# Apache needs to construct a self-referencing URL (a URL that refers back

# to the server the response is coming from) it will use ServerName and

# Port to form a "canonical" name.  With this setting off, Apache will

# use the hostname:port that the client supplied, when possible.  This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

#

UseCanonicalName On



#

# TypesConfig describes where the mime.types file (or equivalent) is

# to be found.

#

<IfModule mod_mime.c>

    TypesConfig conf/mime.types

</IfModule>



#

# DefaultType is the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain



#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

# mod_mime_magic is not part of the default server (you have to add

# it yourself with a LoadModule [see the DSO paragraph in the 'Global

# Environment' section], or recompile the server and include mod_mime_magic

# as part of the configuration), so it's enclosed in an <IfModule> container.

# This means that the MIMEMagicFile directive will only be processed if the

# module is part of the server.

#

<IfModule mod_mime_magic.c>

    MIMEMagicFile conf/magic

</IfModule>



#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off



#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog logs/error.log



#

# LogLevel: Control the number of messages logged to the error.log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn



#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t "%r" %>s %b" common

LogFormat "%h %l "%{User-agent}i"" agent

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined

LogFormat "%{Referer}i -> %U" referer



#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here.  Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

#CustomLog logs/access.log common



#

# If you would like to have agent and referer logfiles, uncomment the

# following directives.

#

CustomLog logs/referer.log referer

CustomLog logs/agent.log agent



#

# If you prefer a single logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

#CustomLog logs/access.log combined



CustomLog logs/access.log common env=!attacks

CustomLog logs/attack.log combined env=attacks



#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory listings,

# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of:  On | Off | EMail

#

ServerSignature On



#

# Apache parses all CGI scripts for the shebang line by default.

# This comment line, the first line of the script, consists of the symbols

# pound (#) and exclamation (!) followed by the path of the program that

# can execute this specific script.  For a perl script, with perl.exe in

# the C:Program FilesPerl directory, the shebang line should be:



#!c:/usr/bin/perl



# Note you _must_not_ indent the actual shebang line, and it must be the

# first line of the file.  Of course, CGI processing must be enabled by

# the appropriate ScriptAlias or Options ExecCGI directives for the files

# or directory in question.

#

# However, Apache on Windows allows either the Unix behavior above, or can

# use the Registry to match files by extention.  The command to execute

# a file of this type is retrieved from the registry by the same method as

# the Windows Explorer would use to handle double-clicking on a file.

# These script actions can be configured from the Windows Explorer View menu,

# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit

# button allows you to modify the Actions, of which Apache 1.3 attempts to

# perform the 'Open' Action, and failing that it will try the shebang line.

# This behavior is subject to change in Apache release 2.0.

#

# Each mechanism has it's own specific security weaknesses, from the means

# to run a program you didn't intend the website owner to invoke, and the

# best method is a matter of great debate.

#

# To enable the this Windows specific behavior (and therefore -disable- the

# equivilant Unix behavior), uncomment the following directive:

#

#ScriptInterpreterSource registry

#

# The directive above can be placed in individual <Directory> blocks or the

# .htaccess file, with either the 'registry' (Windows behavior) or 'script'

# (Unix behavior) option, and will override this server default option.

#



#

# Aliases: Add here as many aliases as you need (with no limit). The format is

# Alias fakename realname

#

<IfModule mod_alias.c>



    #

    # Note that if you include a trailing / on fakename then the server will

    # require it to be present in the URL.  So "/icons" isn't aliased in this

    # example, only "/icons/"..

    #

    Alias /icons/ "C:/usr/Apache/icons/"



    <Directory "C:/usr/Apache/icons">

        Options Indexes MultiViews

        AllowOverride None

        Order allow,deny

        Allow from all

    </Directory>



    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the realname directory are treated as applications and

    # run by the server when requested rather than as documents sent to the client.

    # The same rules about trailing "/" apply to ScriptAlias directives as to

    # Alias.

    #

    ScriptAlias /cgi-bin/ "c:/usr/Apache/httpd/html/cgi-bin/"



    #

    # "C:/usr/Apache/cgi-bin" should be changed to whatever your ScriptAliased

    # CGI directory exists, if you have that configured.

    #



    <Directory "c:/usr/Apache/httpd/html/cgi-bin">

        AllowOverride None

        Options None ExecCGI Includes

        Order allow,deny

        Allow from all

    </Directory>



</IfModule>

# End of aliases.



#

# Redirect allows you to tell clients about documents which used to exist in

# your server's namespace, but do not anymore. This allows you to tell the

# clients where to look for the relocated document.

# Format: Redirect old-URI new-URL

#



#

# Directives controlling the display of server-generated directory listings.

#

<IfModule mod_autoindex.c>



    #

    # FancyIndexing is whether you want fancy directory indexing or standard

    #

    # Note, add the option TrackModified to the IndexOptions default list only

    # if all indexed directories reside on NTFS volumes.  The TrackModified flag

    # will report the Last-Modified date to assist caches and proxies to properly

    # track directory changes, but it does _not_ work on FAT volumes.

    #

    IndexOptions FancyIndexing



    #

    # AddIcon* directives tell the server which icon to show for different

    # files or filename extensions.  These are only displayed for

    # FancyIndexed directories.

    #

    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip



    AddIconByType (TXT,/icons/text.gif) text/*

    AddIconByType (IMG,/icons/image2.gif) image/*

    AddIconByType (SND,/icons/sound2.gif) audio/*

    AddIconByType (VID,/icons/movie.gif) video/*



    AddIcon /icons/binary.gif .bin .exe

    AddIcon /icons/binhex.gif .hqx

    AddIcon /icons/tar.gif .tar

    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

    AddIcon /icons/a.gif .ps .ai .eps

    AddIcon /icons/layout.gif .html .shtml .htm .pdf

    AddIcon /icons/text.gif .txt

    AddIcon /icons/c.gif .c

    AddIcon /icons/p.gif .pl .py

    AddIcon /icons/f.gif .for

    AddIcon /icons/dvi.gif .dvi

    AddIcon /icons/uuencoded.gif .uu

    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

    AddIcon /icons/tex.gif .tex

    AddIcon /icons/bomb.gif core



    AddIcon /icons/back.gif ..

    AddIcon /icons/hand.right.gif README

    AddIcon /icons/folder.gif ^^DIRECTORY^^

    AddIcon /icons/blank.gif ^^BLANKICON^^



    #

    # DefaultIcon is which icon to show for files which do not have an icon

    # explicitly set.

    #

    DefaultIcon /icons/unknown.gif



    #

    # AddDescription allows you to place a short description after a file in

    # server-generated indexes.  These are only displayed for FancyIndexed

    # directories.

    # Format: AddDescription "description" filename

    #

    #AddDescription "GZIP compressed document" .gz

    #AddDescription "tar archive" .tar

    #AddDescription "GZIP compressed tar archive" .tgz



    #

    # ReadmeName is the name of the README file the server will look for by

    # default, and append to directory listings.

    #

    # HeaderName is the name of a file which should be prepended to

    # directory indexes.

    #

    # If MultiViews are amongst the Options in effect, the server will

    # first look for name.html and include it if found.  If name.html

    # doesn't exist, the server will then look for name.txt and include

    # it as plaintext if found.

    #

    ReadmeName README

    HeaderName HEADER



    #

    # IndexIgnore is a set of filenames which directory indexing should ignore

    # and not include in the listing.  Shell-style wildcarding is permitted.

    #

    IndexIgnore .* *~ *# HEADER* README* RCS CVS *,v *,t



</IfModule>

# End of indexing directives.



#

# Document types.

#

<IfModule mod_mime.c>



    #

    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress

    # information on the fly. Note: Not all browsers support this.

    # Despite the name similarity, the following Add* directives have nothing

    # to do with the FancyIndexing customization directives above.

    #

    AddEncoding x-compress Z

    AddEncoding x-gzip gz tgz

    #

    # AddLanguage allows you to specify the language of a document. You can

    # then use content negotiation to give a browser a file in a language

    # it can understand.

    #

    # Note 1: The suffix does not have to be the same as the language

    # keyword --- those with documents in Polish (whose net-standard

    # language code is pl) may wish to use "AddLanguage pl .po" to

    # avoid the ambiguity with the common suffix for perl scripts.

    #

    # Note 2: The example entries below illustrate that in quite

    # some cases the two character 'Language' abbreviation is not

    # identical to the two character 'Country' code for its country,

    # E.g. 'Danmark/dk' versus 'Danish/da'.

    #

    # Note 3: In the case of 'ltz' we violate the RFC by using a three char

    # specifier. But there is 'work in progress' to fix this and get

    # the reference data for rfc1766 cleaned up.

    #

    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)

    # French (fr) - German (de) - Greek-Modern (el)

    # Italian (it) - Korean (kr) - Norwegian (no)

    # Portugese (pt) - Luxembourgeois* (ltz)

    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)

    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)

    # Russian (ru)

    #

    AddLanguage da .dk

    AddLanguage nl .nl

    AddLanguage en .en

    AddLanguage et .ee

    AddLanguage fr .fr

    AddLanguage de .de

    AddLanguage el .el

    AddLanguage he .he

    AddCharset ISO-8859-8 .iso8859-8

    AddLanguage it .it

    AddLanguage ja .ja

    AddCharset ISO-2022-JP .jis

    AddLanguage kr .kr

    AddCharset ISO-2022-KR .iso-kr

    AddLanguage no .no

    AddLanguage pl .po

    AddCharset ISO-8859-2 .iso-pl

    AddLanguage pt .pt

    AddLanguage pt-br .pt-br

    AddLanguage ltz .lu

    AddLanguage ca .ca

    AddLanguage es .es

    AddLanguage sv .se

    AddLanguage cz .cz

    AddLanguage ru .ru

    AddLanguage tw .tw

    AddLanguage zh-tw .tw

    AddCharset Big5         .Big5    .big5

    AddCharset WINDOWS-1251 .cp-1251

    AddCharset CP866        .cp866

    AddCharset ISO-8859-5   .iso-ru

    AddCharset KOI8-R       .koi8-r

    AddCharset UCS-2        .ucs2

    AddCharset UCS-4        .ucs4

    AddCharset UTF-8        .utf8



    # LanguagePriority allows you to give precedence to some languages

    # in case of a tie during content negotiation.

    #

    # Just list the languages in decreasing order of preference. We have

    # more or less alphabetized them here. You probably want to change this.

    #

    <IfModule mod_negotiation.c>

        LanguagePriority pl en da nl et fr de el it ja kr no pt pt-br ru ltz ca es sv tw

    </IfModule>



    #

    # AddType allows you to tweak mime.types without actually editing it, or to

    # make certain files to be certain types.

    #

    # For example, the php 3.x module (not part of the Apache distribution - see

    # http://www.php.net) will typically use:

    #

    #AddType application/x-httpd-php3 .php3

    #AddType application/x-httpd-php3-source .phps

    #

    # And for php 4.x, use:

    #

    #AddType application/x-httpd-php .php

    #AddType application/x-httpd-php-source .phps



AddType application/x-tar .tgz



    #

    # AddHandler allows you to map certain file extensions to "handlers",

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action command (see below)

    #

    # If you want to use server side includes, or CGI outside

    # ScriptAliased directories, uncomment the following lines.

    #

    # To use CGI scripts:

    #

AddHandler cgi-script .cgi

AddHandler cgi-script .pl



    #

    # To use server-parsed HTML files

    #

AddType text/html .shtml

AddHandler server-parsed .shtml



    #

    # Uncomment the following line to enable Apache's send-asis HTTP file

    # feature

    #

    #AddHandler send-as-is asis



    #

    # If you wish to use server-parsed imagemap files, use

    #

    #AddHandler imap-file map



    #

    # To enable type maps, you might want to use

    #

    #AddHandler type-map var



</IfModule>

# End of document types.



#

# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.

# Format: Action media/type /cgi-script/location

# Format: Action handler-name /cgi-script/location

#



#

# MetaDir: specifies the name of the directory in which Apache can find

# meta information files. These files contain additional HTTP headers

# to include when sending the document

#

#MetaDir .web



#

# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.

#

#MetaSuffix .meta



#

# Customizable error response (Apache style)

#  these come in three flavors

#

#    1) plain text

#ErrorDocument 500 "The server made a boo boo.

#  n.b.  the single leading (") marks it as text, it does not get output

#

#    2) local redirects

#ErrorDocument 404 /missing.html

#  to redirect to local URL /missing.html

#ErrorDocument 404 /cgi-bin/missing_handler.pl

#  N.B.: You can redirect to a script or a document using server-side-includes.



ErrorDocument 401 /error/401.php

ErrorDocument 403 /error/403.php

ErrorDocument 404 /error/404.php

ErrorDocument 500 /error/500.php



Alias /error/ c:/usr/Apache/error/



    <Directory "c:/usr/Apache/error/*">

    AllowOverride FileInfo AuthConfig Limit

    Options Includes

    <Limit GET POST OPTIONS PROPFIND>

        Order allow,deny

        Allow from all

    </Limit>

    <LimitExcept GET POST OPTIONS PROPFIND>

        Order deny,allow

        Deny from all

    </LimitExcept>

    </Directory>





#    3) external redirects

#ErrorDocument 402 http://some.other_server.com/subscription_info.html

#  N.B.: Many of the environment variables associated with the original

#  request will *not* be available to such a script.



#

# Customize behaviour based on the browser

#

<IfModule mod_setenvif.c>



    #

    # The following directives modify normal HTTP response behavior.

    # The first directive disables keepalive for Netscape 2.x and browsers that

    # spoof it. There are known problems with these browser implementations.

    # The second directive is for Microsoft Internet Explorer 4.0b2

    # which has a broken HTTP/1.1 implementation and does not properly

    # support keepalive when it is used on 301 or 302 (redirect) responses.

    #

    BrowserMatch "Mozilla/2" nokeepalive

    BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0



    #

    # The following directive disables HTTP/1.1 responses to browsers which

    # are in violation of the HTTP/1.0 spec by not being able to grok a

    # basic 1.1 response.

    #

    BrowserMatch "RealPlayer 4.0" force-response-1.0

    BrowserMatch "Java/1.0" force-response-1.0

    BrowserMatch "JDK/1.0" force-response-1.0



</IfModule>

# End of browser customization directives



#

# Allow server status reports, with the URL of http://servername/server-status

# Change the ".localhost" to match your domain to enable.

#

<Location /server-status>

    SetHandler server-status

    Order deny,allow

    Deny from all

    Allow from 127.0.0.

</Location>



#

# Allow remote server configuration reports, with the URL of

# http://servername/server-info (requires that mod_info.c be loaded).

# Change the ".localhost" to match your domain to enable.

#

<Location /server-info>

    SetHandler server-info

    Order deny,allow

    Deny from all

    Allow from 127.0.0.

</Location>



#

# There have been reports of people trying to abuse an old bug from pre-1.1

# days.  This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a logging

# script on phf.apache.org.  Or, you can record them yourself, using the script

# support/phf_abuse_log.cgi.

#

#<Location /cgi-bin/phf*>

#    Deny from all

#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi

#</Location>



#

# Proxy Server directives. Uncomment the following lines to

# enable the proxy server:

#

#<IfModule mod_proxy.c>

#    ProxyRequests On



#    <Directory proxy:*>

#        Order deny,allow

#        Deny from all

#        Allow from .localhost

#    </Directory>



    #

    # Enable/disable the handling of HTTP/1.1 "Via:" headers.

    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)

    # Set to one of: Off | On | Full | Block

    #

#    ProxyVia On



    #

    # To enable the cache as well, edit and uncomment the following lines:

    # (no cacheing without CacheRoot)

    #

#    CacheRoot "C:/usr/Apache/proxy"

#    CacheSize 5

#    CacheGcInterval 4

#    CacheMaxExpire 24

#    CacheLastModifiedFactor 0.1

#    CacheDefaultExpire 1

#    NoCache a_domain.com another_domain.edu joes.garage_sale.com



#</IfModule>

# End of proxy directives.



### Section 3: Virtual Hosts

#

# VirtualHost: If you want to maintain multiple domains/hostnames on your

# machine you can setup VirtualHost containers for them. Most configurations

# use only name-based virtual hosts so the server doesn't need to worry about

# IP addresses. This is indicated by the asterisks in the directives below.

#

# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>

# for further details before you try to setup virtual hosts.

#

# You may use the command line option '-S' to verify your virtual host

# configuration.



#

# Use name-based virtual hosting.

#

#NameVirtualHost 127.0.0.2



#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

# The first VirtualHost section is used for requests without a known

# server name.

#

#<VirtualHost *>

#    ServerAdmin webmaster@dummy-host.example.com

#    DocumentRoot /www/docs/dummy-host.example.com

#    ServerName dummy-host.example.com

#    ErrorLog logs/dummy-host.example.com-error_log

#    CustomLog logs/dummy-host.example.com-access_log common

#</VirtualHost>



###### Special Log redirect for viruses #################################



SetEnvIf Request_URI "^/default.ida" attacks

SetEnvIf Request_URI "^/scripts" attacks

SetEnvIf Request_URI "^/c/winnt" attacks

SetEnvIf Request_URI "^/_mem_bin" attacks

SetEnvIf Request_URI "^/_vti_bin" attacks

SetEnvIf Request_URI "^/MSADC" attacks

SetEnvIf Request_URI "^/msadc" attacks

SetEnvIf Request_URI "^/d/winnt" attacks

SetEnvIf Request_URI "^(.*)cmd.exe" attacks

SetEnvIf Request_URI "^.*.(exe|dll).*" attacks





<Directory />

redirect /scripts http://n00b.imess.net/pictures.html?virus=

redirect /MSADC http://n00b.imess.net/pictures.html?virus=

redirect /msadc http://n00b.imess.net/pictures.html?virus=

redirect /c http://n00b.imess.net/pictures.html?virus=

redirect /d http://n00b.imess.net/pictures.html?virus=

redirect /_mem_bin http://n00b.imess.net/pictures.html?virus=

redirect /_vti_bin http://n00b.imess.net/pictures.html?virus=

RedirectMatch (.*)cmd.exe$ http://n00b.imess.net/pictures.html?virus=

RedirectMatch (.*)default.ida$ http://n00b.imess.net/pictures.html?virus=

RedirectMatch ^.*.(exe|dll).* http://n00b.imess.net/pictures.html?virus=

</Directory>





LoadModule gzip_module modules/ApacheModuleGzip.dll

#AddModule mod_gzip.c



<IfModule mod_gzip.c>

mod_gzip_on                   Yes

mod_gzip_can_negotiate        Yes

mod_gzip_add_header_count     Yes

mod_gzip_static_suffix .gz



mod_gzip_update_static No

mod_gzip_command_version      '/mod_gzip_status'

mod_gzip_temp_dir             C:usrphpsesje

mod_gzip_keep_workfiles       No

mod_gzip_minimum_file_size    500

mod_gzip_maximum_file_size    500000

mod_gzip_maximum_inmem_size   60000

mod_gzip_min_http             1000



mod_gzip_handle_methods GET POST

mod_gzip_item_exclude         reqheader  "User-agent: Mozilla/4.0[678]"

mod_gzip_item_exclude       mime ^image/.*

mod_gzip_item_include       file .html$

mod_gzip_item_include       file .htm$

mod_gzip_item_exclude       file .css$

mod_gzip_item_exclude       file .js$

mod_gzip_item_include       file .jsp$

mod_gzip_item_include       file .php$

mod_gzip_item_include       file .php3$

mod_gzip_item_include       file .pl$

mod_gzip_item_include       mime ^text/.*

mod_gzip_item_include       mime "application/x-httpd-php."

mod_gzip_item_include       mime ^httpd/unix-directory$

mod_gzip_item_include       handler ^perl-script$

mod_gzip_item_include       handler ^server-status$

mod_gzip_item_include       handler ^server-info$



mod_gzip_dechunk              Yes

LogFormat                     "%h %l %u %t "%V %r" %<s %b mod_gzip: %{mod_gzip_result}n In:%{mod_gzip_input_size}n -< Out:%{mod_gzip_output_size}n = %{mod_gzip_compression_ratio}n pct." common_with_mod_gzip_info2

CustomLog                     logs/mod_gzip.log common_with_mod_gzip_info2

mod_gzip_add_header_count     Yes

mod_gzip_send_vary Yes

AddEncoding gzip .gz



</IfModule>